Siemens PLM NX 7.5.5.4 Update Only 32bit & 64bit

4834385

Siemens PLM NX 7.5.5.4 Update Only 32bit & 64bit | 978 MB & 1.24 GB

Bringing High Definition PLM to product development, Siemens PLM NX redefines productivity with a powerful suite of integrated CAD, CAE and CAM solutions. Siemens PLM NX takes full advantage of the High Definition PLM Technology Framework to improve decision making throughout the product development process.
About Siemens AG
Siemens AG is a German engineering conglomerate, the largest of its kind in Europe. Siemens has international headquarters located in Berlin, Munich and Erlangen. The company has three main business sectors: Industry, Energy, and Healthcare; with a total of 15 divisions. Worldwide, Siemens and its subsidiaries employ approximately 420,800 people in nearly 190 countries and reported global revenue of 76.651 billion euros for the year of 2009. Siemens AG is listed on the Frankfurt Stock Exchange, and has been listed on the New York Stock Exchange since March 12, 2001.

About SIEMENS PLM NX
NX is a next-generation digital product development system that helps companies transform the product lifecycle. With the industry's broadest suite of integrated, fully associative CAD/CAM/CAE applications, NX touches the full range of development processes in product design, manufacturing and simulation.
NX provides a complete suite of integrated process automation tools to enable companies to capture and reuse product and process knowledge encouraging the use of corporate best practice.

What's fixed in NX 7.5.5.4
- Part Family giving error in when updating
- Wire-edm operation loses information when copied
- Non associative PMI geometric symbol
- CAM: Drill to model depth creates endless toolpath in certain conditions
- CAD: Unable to mate components tangent in both directions
- Contour_Profile gives unrecognized Tool motions in NX 5.0.2.2
- Planar mill gouges the part
- Engage motion positions tool below top face of part
- Error by retrieving Countersink tool from Inclass into NX
- Gouges in operation
- Unable to update linked body to correct value ...
- Error in MillUser operation -> No MOM MSYS Event while posting
- Delete All References does not remove all Inter Part Expressions
- CSYS associated with a UDF could not be moved to another Layer
- Rename an expression does not update linked expressions
- Thread display shows a gap on chamfer edge of the hole
- Unpredictable behaviour of RecurDyn Solver
- op flagged as edited if feed in cycle is change but not if Feeds and Speeds...
- Trouble with ProE transfer
- Contour profile operation have steps in the path when multi depth is used
- NX 6: Unwrap divided conical face, not correct
- Cavity Milling gouges the Part on several Cut-Levels if 'Body' is selected
- WEDMIE_MAV with Lead Out Point on NX 6.0.3 64bit
- Cloning assembly is deleting IPE rather than linking to the new cloned comp name
- Variable position Mating Conditions fail to convert to NX 6 assembly constraints
- Missing Arrows on Dimension after DXF Export
- CAM: PR - Resulting IPW is different when Turing and Milling Operations changed
- Motion - Constraint: point looses contact to curve
- Regression missing warning for too big size on text
- Section Line Preferences is changed when opening file in 64bit
- CAM: PR - UDE's not shown in syncmanager-window
- Center lines are wrong translated through 2D exchange to DWG
- In Cavity Milling the Tool Gauge the Part
- Does not update unless Point to Point operation is generated again
- Wrong display when drill and turning operation in the same program
- Plate preparation returns an internal error when plate has a hole in it
- Clocking of electrical boots using angle constraint result in positional problem
- NC:Modeler error: non fatal run-time error
- NX 6 64bit Error: Unite - Part Family Template
- Object dependency information is unavailable on linked bodies
- Problem with selecting datum CSYS by name
- Cannot control item type for custom region components
- Problems with using Motion Simulation
- Open Feature is created without partition mark
- Feedrate does not update unless Point to Point operation is generated again
- Change in Point to Point need to Re-Generate the Operation
- Feedrate parameter drill cycle doesn't change in regenerate needed
- CAM: PR - Cavity Mill leaves Material on the Blank and cut it at a deeper Level
- Cannot select pattern control point with UF_UI_point_construct
- Centerlines not properly translated to
- 2D Centerlines change to Continuous after translation to DWG
- NX Ship: Update of Geometric Modification thought Distribution
- Replace Part Fails - connection broken, extra constraints created
- NX 6 with TCEng -> preference for section line won't be saved
- After modification of the multi body part, distribution failed
- COMMAND: Update
- CAM: PR - Verify show wrong 2D-Workpiece by using Tool-Assembly
- NX Ship - Feature Migration from NX 5 to NX 7.5
...........and more, more. Full list of fixed bugs in archive. Enjoy

Name: Siemens PLM NX

Version: 7.5.5.4 Update Only 32bit & 64bit

Creator: PLM−Product Lifecycle Management: Siemens PLM Software

Interface: multilanguage

Requirements for updates: Siemens PLM NX 7.5 (7.5.0-7.5.4) with UGS FlexLM Server (by LND or by SSQ)


کد:
http://www.filesonic.com/file/4265336985/spn7554uo32b.part1.rar
http://www.filesonic.com/file/4265348095/spn7554uo32b.part2.rar
http://www.filesonic.com/file/4265261685/spn7554uo32b.part3.rar
http://www.filesonic.com/file/4265367965/spn7554uo64b.part1.rar
http://www.filesonic.com/file/4265372375/spn7554uo64b.part2.rar
http://www.filesonic.com/file/4265368165/spn7554uo64b.part3.rar
Mirror:

کد:
http://www.uploadstation.com/file/T4Mw9er/spn7554uo32b.part1.rar
http://www.uploadstation.com/file/THrbDGj/spn7554uo32b.part2.rar
http://www.uploadstation.com/file/hXwd55E/spn7554uo32b.part3.rar
http://www.uploadstation.com/file/EWW5nrF/spn7554uo64b.part1.rar
http://www.uploadstation.com/file/BDCDVcq/spn7554uo64b.part2.rar
http://www.uploadstation.com/file/jYSETwP/spn7554uo64b.part3.rar