One requirement for this instruction to work is you need PHP 5.3. I have tried to patch PHP 5.2.17 according to PHP-FPM website but it didn't work. After tried to patch it so many times, I decided to upgrade to PHP 5.3.5 and it works correctly now.
Also, when compile PHP-FPM, you will get 2 PHP files. One is "php" which is for CLI mode and "php-fpm" which is PHP-FPM. "php-cgi" file won't be compiled until you removed "--enable-fpm" from configuration. That means... if you want to have the rest of Virtualhosts to run with mod_fcgid (php-cgi) with PHP 5.2, you can still do that. Just make sure to upgrade directly to PHP 5.3 and PHP-FPM at the same time. Always have "--enable-fpm" in configuration file for PHP to compile. That way, "php-cgi" will not compile in PHP version 5.3. So, all websites run with mod_fcgid that still use "php-cgi" file still run in PHP 5.2.
In case you need all of them to run in PHP 5.3. You need to compile PHP twice, one with "--enable-fpm" and one without it.
1. Enable PHP-FPM and compile PHP.
1.1 Copy "configure.php5" for custom compile
- mkdir -p /usr/local/directadmin/custombuild/custom/suphp
- cp /usr/local/directadmin/custombuild/configure/suphp/configure.php5 /usr/local/directadmin/custombuild/custom/suphp
1.2 Edit configure.php5
- nano -w /usr/local/directadmin/custombuild/custom/suphp/configure.php5
add "--enable-fpm" into the file. After edit, the "configure.php5" will look like below :
- #!/bin/sh
- "./configure" \
- "--prefix=/usr/local/php5" \
- "--enable-force-cgi-redirect" \
- "--enable-fastcgi" \
- "--with-config-file-path=/usr/local/etc/php5/cgi" \
- "--with-curl=/usr/local/lib" \
- "--with-gd" \
- "--with-gettext" \
- "--with-jpeg-dir=/usr/local/lib" \
- "--with-freetype-dir=/usr/local/lib" \
- "--with-kerberos" \
- "--with-mcrypt" \
- "--with-mhash" \
- "--with-mysql=/usr" \
- "--with-mysqli=/usr/bin/mysql_config" \
- "--with-pcre-regex=/usr/local" \
- "--with-pdo-mysql=/usr" \
- "--with-pear=/usr/local/lib/php" \
- "--with-png-dir=/usr/local/lib" \
- "--with-zlib" \
- "--with-zlib-dir=/usr/local/lib" \
- "--with-openssl" \
- "--with-iconv=/usr/local" \
- "--enable-bcmath" \
- "--enable-calendar" \
- "--enable-exif" \
- "--enable-ftp" \
- "--enable-gd-native-ttf" \
- "--enable-magic-quotes" \
- "--enable-soap" \
- "--enable-sockets" \
- "--enable-mbstring" \
- "--enable-zip" \
- "--enable-wddx" \
- "--enable-fpm"
1.3 Compile PHP
- cd /usr/local/directadmin/custombuild
- ./build php n
Note : If you get error while compile, you may need to run " .build clean " and then try to compile again.
1.4 After compiled, you will see where PHP-FPM file located as below :
- .....
- Make Complete
- Copying php.ini..
- /usr/local/etc/php5/cgi/php.ini already exists, skipping.
- Installing php...
- Installing PHP SAPI module: fpm
- Installing PHP CLI binary: /usr/local/php5/bin/
- Installing PHP CLI man page: /usr/local/php5/man/man1/
- Installing PHP FPM binary: /usr/local/php5/sbin/
- Installing PHP FPM config: /usr/local/php5/etc/
- Installing PHP FPM man page: /usr/local/php5/man/man8/
- Installing build environment: /usr/local/php5/lib/php/build/
- Installing header files: /usr/local/php5/include/php/
- Installing helper programs: /usr/local/php5/bin/
- program: phpize
- program: php-config
- Installing man pages: /usr/local/php5/man/man1/
- page: phpize.1
- page: php-config.1
- Installing PEAR environment: /usr/local/lib/php/
- .....
2. Now, Create Init script file
2.1 Copy file from source
- cp /usr/local/directadmin/custombuild/php-5.3.5/sapi/fpm/init.d.php-fpm.in /etc/init.d/php-fpm
- chmod 755 /etc/init.d/php-fpm
2.2 Edit php.fpm init script file as below:
- nano -w /etc/init.d/php-fpm
Edit php.fpm file FROM :
- .....
- prefix=@prefix@
- exec_prefix=@exec_prefix@
- php_fpm_BIN=@sbindir@/php-fpm
- php_fpm_CONF=@sysconfdir@/php-fpm.conf
- php_fpm_PID=@localstatedir@/run/php-fpm.pid
- php_opts="--fpm-config $php_fpm_CONF"
- .....
TO :
- .....
- prefix=/usr/local/php5
- exec_prefix=${prefix}
- php_fpm_BIN=/usr/local/php5/sbin/php-fpm
- php_fpm_CONF=/usr/local/php5/etc/php-fpm.conf
- php_fpm_PID=/var/run/php-fpm.pid
- php_opts="--fpm-config $php_fpm_CONF"
- .....
You may need to run command below to have PHP-FPM run automatically when start up (After reboot or turn on the machine) :
- /sbin/chkconfig php-fpm on
2.3 Edit PHP-FPM configuration file to match your need. My example below is just to make it work but you can adjust to whatever you like :
- nano -w /usr/local/php5/etc/php-fpm.conf
Below is my "php-fpm.conf" configuration :
- [global]
- pid = /var/run/php-fpm.pid
- error_log = /var/log/php-fpm.log
- [admin]
- listen = /fcgi/admin/public_html/admin.sock
- listen.owner = $pool
- listen.group = $pool
- listen.mode = 0666
- user = $pool
- group = $pool
- pm = dynamic
- pm.max_children = 50
- pm.start_servers = 3
- pm.min_spare_servers = 3
- pm.max_spare_servers = 10
- php_admin_value[open_basedir] = /home/$pool/:/tmp:/var/tmp:/var/www/html
Note 1 : $pool is variable which will replaced by the data from the bracket. Here, that is "admin".
Note 2 : php_admin_value[open_basedir] is not require but suggested. Also, without "/var/www/html", you won't be access your webmail or anything through domain name. However, you can still access webmail or anything through IP Address.
2.4 Try to start / stop / restart PHP-FPM
- service php-fpm start
- service php-fpm stop
- service php-fpm restart
آموزش نصب و کانفیگ php-fpm در دایرکت ادمین
پاسخ با نقل قول
علاقه مندی ها (بوک مارک ها)