Siemens PLM NX 7.5.4.4 MP05 (CAD/CAM/CAE )
Siemens PLM NX 7.5.4.4 MP05 (CAD/CAM/CAE )
http://i.lulzimg.com/4c157daa6c.jpg
Siemens PLM NX 7.5.4.4 MP05 CAD/CAM/CAE
Size | 2.53 GB
Genre: Software
BringingHigh Definition PLM to product development, Siemens PLM NX redefinesproductivity with a powerful suite of integrated CAD, CAE and CAMsolutions. Siemens PLM NX takes full advantage of the High DefinitionPLM Technology Framework to improve decision making throughout theproduct development process.
About Siemens AG
Siemens AGis a German engineering conglomerate, the largest of its kind in Europe.Siemens has international headquarters located in Berlin, Munich andErlangen. The company has three main business sectors: Industry, Energy,and Healthcare; with a total of 15 divisions. Worldwide, Siemens andits subsidiaries employ approximately 420,800 people in nearly 190countries and reported global revenue of 76.651 billion euros for theyear of 2009. Siemens AG is listed on the Frankfurt Stock Exchange, andhas been listed on the New York Stock Exchange since March 12, 2001.
About SIEMENS PLM NX
NXis a next-generation digital product development system that helpscompanies transform the product lifecycle. With the industrys broadestsuite of integrated, fully associative CAD/CAM/CAE applications, NXtouches the full range of development processes in product design,manufacturing and simulation.
NX provides a complete suite ofintegrated process automation tools to enable companies to capture andreuse product and process knowledge encouraging the use of corporatebest practice.
Whats fixed in Maintenance Pack 05 for NX 7.5.4.4
- The problem in Ship Design where certain Shell Expansion curves where mapped incorrectly is fixed.
- The problem in Ship Design where the MarkingLineAttributes profiles were on the wrong cutting side is fixed.
- The problem in Ship Design where creating Inverse Bendings somtimes caused errors is fixed.
- The problem in Ship Design where arcs were output incorrectly from NXSHIP XML is fixed.
-The problem in Ship Design where the Plate Preparation layer fromSingle parts changed to layer 1 after modifications is fixed.
- Theproblem in Ship Design where a warning that a text block did not fit wasnot shown when processing the data for Manufacturing XML Output isfixed.
- The problem in Manufacturing Turning where reselecting the start point caused an error is fixed.
-The problem in Manufacturing Turning where specifying Axial Trim Plane 1and Axial Trim Plane 2 in a rough turning operation caused an error isfixed.
- The problem in Assemblies where editing a feature sometimes caused errors is fixed.
- The problem where the Part Cleanup utility on some parts took long time to finish is improved.
- The problem in Drafting where the detail view label had the wrong scale factor is fixed.
- The problem in Drafting where the detail view scale defaulted back to 1:1 after update is fixed.
- The problem where the Teamcenter relation IMAN_UG_UDF was not being created during Part Save is fixed.
- The problem in Routing where a Built-in-Path component did not flip using the Flip Component dialog is fixed.
- The problem in Routing where replacing a backshell caused the overstock on a connected segment to disappear is fixed.
-The problem where the partial loading of an assembly with PMI datawhich referenced geometry that no longer existed in a sub-componentcaused an error is fixed.
- The problem where loading an assemblywith PMI data which referenced geometry in an unloaded sub-assemblycaused an error is fixed.
- The problem where the sketch color changed during editing in a Lightweight-shown assembly is fixed.
- The problem where opening certain assemblies caused the error There is an object that depends upon itself is fixed.
- The problem in NX Open where the SignJar utility failed to sign a jar file is fixed.
-The problem in NX Open where forcing an update of a model with KF rulesfailed due to NXOpen JAR file signature checking is fixed.
- The problem in Routing where the name attribute of the port and terminals of a Multiport could not be renamed is fixed.
-The problem in in Assemblies where if WAVE edits were made to anassembly containing frozen WAVE data before the components were unfrozenthe assembly did not update and the Assembly Navigator did not show theOut of Date flag and there were no warnings is fixed.
- The problem where using the Routing Run Import API caused a Storage Manager error is fixed.
کد:
http://www.filesonic.com/file/4203383955/SIS7544.part1.rar
http://www.filesonic.com/file/4203383935/SIS7544.part2.rar
http://www.filesonic.com/file/4203406275/SIS7544.part3.rar
http://www.filesonic.com/file/4203511445/SIS7544.part4.rar
http://www.filesonic.com/file/4203515025/SIS7544.part5.rar
http://www.filesonic.com/file/4203444195/SIS7544.part6.rar
Mirror:
کد:
http://www.filejungle.com/f/TmPUw3/SIS7544.part1.rar
http://www.filejungle.com/f/pb25rx/SIS7544.part2.rar
http://www.filejungle.com/f/EfWeW8/SIS7544.part3.rar
http://www.filejungle.com/f/JB5Cuz/SIS7544.part4.rar
http://www.filejungle.com/f/Ag8pkk/SIS7544.part5.rar
http://www.filejungle.com/f/q7qGWm/SIS7544.part6.rar
